Kaplux Honeycomb | Glass Products

Kaplux is the result of intensive research and our effort to develop a glazing product that both allows natural light into a building while providing a high degree of thermal insulation. Kaplux uses UV stabilized, multicell polymer infills in glass to redirect and allow natural lighting through. The filtered light allows for a substantial reduction in heat transmitted into the building, resulting in comfortable and energy-effective interiors.

Light transmission can be controlled in the range of 55% to 77% based on the thickness, colour and type of honeycomb panels used. The solar performance of the IGUs can be further optimized by using Low-E or other multifunctional coatings.

The flexible manufacturing process allows for a great deal of customization possibilities of the honeycomb diffusers themselves. Different coloured cells can be used to create patters and design within the glass thus making Kaplux a highly functional glazing product.

The panels transmit up to 70% of incident light (depending on type of infill and glass specification). They are produced from UV stabilized polymers and manufactured using “angular selective” technology.



Kaplux Diffusers

Opting for Kaplux means: Energy Efficiency – Reduced Solar Transmission – Glare protection – Thermal Performance – High UV resistance – Custom Design

A key development in architecture over the last decade was the effort to allow for as much natural light as possible. The only way to accomplish this is by using transparent or translucent materials.

The flexible manufacturing process allows for a great deal of customization possibilities of the honeycomb diffusers themselves. Different coloured cells can be used to create patters and design within the glass thus making Kaplux a highly functional glazing product.

Integrating honeycomb panels from Tubus Bauer, Kaphs has developed insulating glass products in the Kaplux range. These high-performance insulating glass units can be supplied using standard honeycomb panels of 12mm, 14mm,16mm, 20mm or of customized thickness. In addition to neutral colour, honeycomb panels can be customised in colour and size, ranging from 3mm to 12mm.

The panels transmit up to 70% of incident light (depending on type of infill and glass specification). They are produced from UV stabilized polymers and manufactured using “angular selective” technology.